Foxconn nT-330i Manuel d'utilisateur

NETBOX User’s Manual

141-5 LED Indicator IntroductionThe LLS_LEDs status in this table only show BIOS error message. CAUTION!Indication Power_LEDHDD_LEDLLS_LED1LLS_LED2LLS

In this chapter, the placement and the connection of some neces-sary peripherals will be introduced. This chapter includes the following information:

262-1 Placement of NETBOX1. On the Desk 1. You can install your NETBOX in the mount like the right image. To install this bracket, your display mus

27 2. Fit the NETBOX into the bracket with power button locating at the top for easy touch. 3. After that, you can connect the antenna to your NETBO

282-2 Connection of NETBOX1. Connect the AntennaConnect the antenna to the RF port of the NETBOX. You can fold the antenna and rotate it in dif-fere

294. Connect the Network CableConnect LAN cable to the RJ-45 port, with the other end connected to a hub or switch.5. Connect the Power CordConnect

This chapter provides a description of the BIOS setup utility. The BIOS setup menus and available selections may vary from those of your product. For

311Main MenuThe BIOS Setup is accessed by pressing the <Del> button after the Power-On Self-Test (POST) memory test begins and before the operat

312► Deep Sleep[Enabled] This item is used to enable or disable deep sleep function. When enabling deep sleep mode, system can only wake up

313Exit Menu► Save Changes and Exit Exit system setup after saving the changes. Once you are nished making your selections, choose this option from

Trademark:All trademarks are the property of their respective owners.Version:User’s Manual V1.2 for NETBOX. Symbol description: Ca

This chapter introduces the Windows installation : Install Windows 7 Install Drivers in Windows 7

415Make sure you have these ready :1. NETDVD. (It is an optional accessory. If there is no NETDVD in this package, you need other purchase an external

4164. The computer will reboot, and it will start loading the les for installing the Windows 7 Operating System.5. After the computer reboots it will

4179. In the hard disk size screen, you can click the “new” button to create partitions as you need. In this example we are creating a 70GB partition

41810. The setup program will then start to install Windows 7 on your hard disk. During the installa-tion, your computer will restart several times.11

4194-2 Install Drivers in Windows 71. When the Windows 7 is completely installed, you have to install the necessary drivers before using the NETBOX. T

FoxOS is a newly developed Linux Operating System. If it was purchased and pre-installed by factory, the rst time you start your computer, the comput

2155-1 First BootFor the rst time, when you start NETBOX with FoxOS, the computer will automatically launch "First Boot". This section will

2254. Select Date and Time, then click “Forward” to continue. 5. Input the “Username” and “Password”, then click “Finish” to complete the setup. This

2355-2 Desktop1. Desktop OverviewWhen you login the NETBOX FoxOS system, the screen will display the FoxTop desktop: Start: Open program menu.Show Des

Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harm

245Wbar: Click the logo on the Wbar to launch the corresponding application, including the Firefox browser. Besides this, right click on the Wbar can

2555-3 Internet Connection 1. Wired Network Connection Setup The wired network is enabled by default. When you login system and connect a RJ-45 LAN

2652.2. Left-click “Wired” -> ”Add” to create a new wired connection.2.3. Choose the method of connecting. When the operation system is

2753. Wireless Network Connection SetupThe wireless network is enabled by default. If your space is covered by the wireless network signal, your NETBO

2854.2. Input the “Network Name” and select “Wireless security”, then click “Connect”.5. DSL Connection Setup5.1. Right-click the network icon, and ch

2955-4 “Help” IntroductionThe "Help" icon on the desktop provides you with detailed and systemic introduction about FoxOS 3.0 home. Just cl

3055-5 Recover FoxOS 3.0 Home This section will introduce you two ways to recover the FoxOS 3.0 Home. One is to recover from a recovery disk (USB or

3151.1.3. Connect the USB ash disk to your computer or insert a DVD disk into the DVD driver. When the system recognize the device, select it and

3251.2. System Recovery from the USB or DVD disk1.2.1. Power on the computer, connect the recovery USB or insert the recovery DVD into DVD

3351.2.4. It starts to format hard disk and install system. 1.2.5. When the installation is complete, click "Reboot" to restart the system.

RF exposure warning:This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitte

3452. System Recovery from the Hard DiskIf FoxOS 3.0 Home was purchased and pre-installed by factory, they should have created a recovery partition in

3554. Click "Next" to format partition(hd0,0) and recover system from hard disk. The picture will show as below:5. When the installatio

Before using this product, please read the below safety notice carefully, this will help to extend the product’s lifecycle, and work normally. Wh

TABLE OF CONTENTSChapter 1 Introducing the NETBOX Top View ...

The NETBOX is a compact and easy to use desktop. It features all the desktop capabilities but with a slim body design which enables your to browse the

12IntroductionNETBOX features all the desktop capabilities but with a slim body design which enables you to browse the internet in a relaxable and co

131-3 Back Side View1-4 Bottom ViewNo. Name Description1 Sheet Metal NETDVD(optional accessary) or Magnet-Metal-Feet can mag-netize them to seat rmly